Kitting System Facilitates Expansion for Medical Device Manufacturer


Merit Medical Systems, Inc. is a leading manufacturer of medical devices used in diagnostic and interventional cardiology and in radiology procedures. Successful products and growing sales presented the company with challenges at its manufacturing facility in Utah. Merit worked together with Dematic to develop an automated kitting solution that meets their specialized needs.

The challenges

As a high-tech manufacturer, Merit was already very familiar with the advantages of automation. Its production facility in Utah uses highly automated injection molding machines to manufacture medical device components.

In fact, it was the increasing efficiency of the automated manufacturing that was creating challenges further down the line in the assembly process.

Assembly was inefficient. Significant time was required to gather components, resulting in inventory control issues.

Merit realized that the process required improvement. They would need help to achieve increased production rates.

Our solution

To accommodate the increased production and future growth, Merit decided to expand its facility by adding a new final assembly area next to its existing production building.

Merit implemented a kitting solution supported by a Dematic Multishuttle® sub-system. The Multishuttle maximizes the use of space and provides controlled access to inventory. Dematic worked with Merit to optimize buffer and workstation processes.

The solution begins as manufactured product is transported in plastic inventory totes from the production area and into the assembly area on a one-way overhead conveyor.

The totes are inducted into the Multishuttle and stored, seven aisles and double-deep. The Multishuttle serves as a work-inprocess buffer and is controlled by Dematic software. The distributed control architecture ensures a steady flow.

When inventory is required for assembly, the Multishuttle pulls totes from storage and places them on conveyor loop. The conveyor transports the totes to a rightangle transfer and then to the workstation.

The workstations are where workers perform goods-to-person kitting. Workers interact with the Dematic software user interface to request totes of product, acknowledge inventory taken from totes, and send the totes back on the conveyor loop.

The kits are then taken on carts to an area in the facility where other workers assemble the kits into final products. Workers put totes with remaining components back to the conveyor loop to be returned to the Multishuttle.

The Dematic software is a Warehouse Execution System (WES) that interacts with Merit’s Warehouse Management System (WMS). The WMS sends the kit orders to the WES, the WES executes and acknowledges completion back to the WMS

“Merit chose the Dematic Multishuttle to maximize the use of space and provide controlled access to inventory.”

The results

With the Dematic automated goods-toperson kitting solution, Merit has significantly improved its processes and productivity. Throughput capacity is up, while processing time is down:

  • Decreased time required for kitting assembly — from hours to minutes
  • Reduced labor required for picking process by 50%
  • Improved inventory control and kitting accuracy
  • Improved use of facility space with small footprint and high storage density
  • Enhanced flexibility with ability to adjust processes and add capacity for future growth

Key facts

Injection Molding Operation 24 hours/day

Pieces Produced: 41,000/hour

Totes Produced: up to 375/hour

Finished SKUs Assembled: 60/day

Related stories

Let's get started

Tell us about your needs and our experts will guide you down the right path.

Complete the form or give us a call: