Designed for a range of sorting and zone routing applications, Dematic sorters and diverters provide practical, effective applications below 5,000 cartons per hour and a low number of destinations.
There are a range of devices available to sort cartons including a steerable wheel divert, right angle transfers, a positive belt diverter, and a strip belt sorter.
Steerable Wheel Divert
- MDR transportation
- Pneumatic divert actuation
- Energy efficient operation
Model 2465 Steerable Wheel Divert is part of the Motorized Drive Roller (MDR) family of products and provides package transfers to the left or right in low throughput applications.
The Steerable Wheel Divert is a modular device that mounts inside the universal side frame of the Modular Conveyor System. This design allows the sorter to be easily re-located along the conveyor path if divert locations change. To re-locate or add a new divert, rollers in the conveyor are removed at the new location. The Steerable Wheel Divert module is bolted into the side frame of the conveyor while the controls are configured and connected.
High Speed Right Angle Transfer
MDR transportation and transfer
Power Tap Off (PTO) transportation option
Energy efficient operation
Model 2466 Right Angle Transfer is part of the Motorized Driver Roller (MDR) family of products. It provides perpendicular package transfers to the left or right in mid throughput applications.
Right Angle Transfer
- MDR transportation and transfer
- Pneumatic lift
- Energy efficient operation
Model 2467 Right Angle Transfer is part of the Motorized Drive Roller (MDR) family of products. It provides perpendicular package transfers to the left or right in low throughput applications.
Available in Standard and High Performance (HP) versions. The Standard RAT is a low cost alternative with limited performance. The HP RAT is more robust and transfers smaller packages.
Positive Belt Diverter
- Positive divert actuation
- Energy-efficient operation
Model 2468 Positive Belt Diverter provides package diverts to the left or right in low throughput applications. Available as a bed assembly (shown on right) or as a "kit" which be applied at any location within Model 9165 Live Roller transportation conveyor on 1" increments.
Both the bed assembly and kit must be installed in a 9165 Live Roller unit.
Strip Belt Sorter
- Provides optimal performance when using Multishuttle totes
- Transportation drive via Van Der Graaf Drum Motor
- Transfer drive via MDR Powered Roller
- Pneumatic transfer lift
Model 2470 provides perpendicular tote transfers to the left or right in mid throughput applications. The Strip Belt Sorter is built on the standard MCS frame and utilizes common transfer assemblies, a drive frame assembly with motorized drive pulley, and charge/discharge bed assemblies to complete the sorter. Special grooved idler rollers are used to support the strip belts between transfer assemblies and the drive assembly.